Top 10 effective ideas to clean your jewellery

Lumibella Fashion

It is obvious that jewellery requires careful cleaning. You would probably find your valuable jewellery becoming sullied or just plain grimy when you take a closer look. So how to quickly, effectively, and securely clean your jewels? 

To keep it at its dazzling best, all jewellery requires certain attention and care. When you're not sure where to begin, we give you the top ten tips to know the effective methods available to keep your jewellery clean.

Let's get started:

Inspect your Journey

It is easy to overlook that your jewellery needs to be clean, because either you carry it all the time and therefore do not realize the changes, or just because somewhere it is packed away and you don't look at it very much.

I recommend that you take some time every 6-12 months to take a close look at your pieces, particularly the most valuable ones, and offer them an objective assessment. Probability is some or all could do with a bit of a spruce up and it is possible that sterling silver jewellery will be tarnished in general. The great news is that cleaning is very quick with most pieces of jewellery. To find out how to read on. 

Wash your Jewel

This is the easiest cleaning method to do, but it can help virtually all jewels. You may find that for many items, this is all you need to do. And use a soft liquid soap, wash your jewels with warm water. It should fit well for soap without any moisturizer or harmful chemicals. But be sure not to do it with imitation jewellery. For artificial jewellery, it is better to wipe with dry tissue after use. Gently dab the jewellery with fresh tissue paper and store it carefully inside a transparent cover and place it inside a box. This will help the jewellery colour to stay for a longer period. 

Clean using Ultrasonic Cleaner

If grime and dirt are not easily cleaned from intricate parts, then try and follow the directions to get an inexpensive ultrasonic cleaner. Notice that an ultrasonic would not strip tarnish, but with complicated parts that have plenty of crevices where dirt can collect and cling will work great. This will work well for platinum and gold jewellery which has no pearl work or precious stones. 

When to avoid Ultrasonic Cleaner

If, as part of the design, your silver jewellery has darkened areas or soft gemstones such as lapis lazuli, turquoise, or pearls, avoid ultrasonic cleaning to be on the safe zone. Few finishes and soft gemstones may be affected by this technique, so do it with care. For imitation jewellery, the ultrasonic procedure is a definite NO. 

Polishing cloth to Remove Tarnish

In general, sterling silver can taint with time, and also other precious metals, like lower gold carats. It is a normal process with metal and is simple enough to wash the tarnish away from valuable metals. Use a precious metal polishing cloth to clean it if your precious metal jewels is sullied, which are available online. Give the piece a rinse until you're satisfied and dry it to avoid any chemical residue.

Silver Dip for Silver

Silver dip can also be used to remove tarnish from sterling silver very quickly and efficiently. It works especially well with silver chains which, with a polishing cloth alone, can be hard to clean. At your retail supermarket, a large pharmacy, or hardware shop, you must be able to find a silver dip or something similar. Be ready to take the directions closely and, when you're finished, do wash well and dry.

Silver Dip and Gemstone

If your silver jewels have darkened parts as part of the set or soft gemstones such as lapis lazuli, turquoise, or pearls, as it can affect those textures and gemstones, as with an ultrasonic cleaner, then skip silver dip to be on the safe side. 

Avoid harsh chemicals

Don't use the jewel cleaning techniques of 'old wives' including toothpaste or baking soda rubbed on the metal. Each time you do it, it will extract tiny pieces of metal and this will weaken and replenish your valuable jewels over time. 

When using a polishing cloth, brush, or something rubbing against metal, take care, especially if your jewels have a much more delicate finish. Far too much zeal to clean jewelry might not be a great idea! 

How to clean silk thread necklace

The necklace which has silk thread can be rinsed in warm soap water. Lay the part straight or hang it directly to dry the silk. Alternatively, use a silk setting iron to flatten it out.

How to store your Jewelry

Now that your jewels are nice and clean, think about how to store it to prevent cleaning it soon. In general, avoid putting precious metal jewels in a humid location-especially in the bathroom. Humidity can speed up a great deal of tarnishing, so it is better to avoid it. If you reside in a humid area, then maybe you should take extra care and do more cleaning. 

Presumably, it is essential to store precious metal jewels away from free-flowing air. It will slow down the tarnish and help keep the dust in shape. When you can, carry it in a bag, or small jewel box. If you want to showcase jewels, then it is sure that it would require frequent cleaning.

I hope this was very informative. Taking care of jewellery is the most important part to make it last longer. Want more tips to keep your jewellery looking fresh and new? connect with our Jewellery Stylist to know more. 

 


Share this article


Older Post


Leave a comment

Please note, comments must be approved before they are published

Sale

Unavailable

Sold Out